Steps for European Car Models

-- Steady & Reliable Manufacturer --

CAN-Bus Integration and Electronic Compatibility

Our electric running board solutions for European vehicle platforms are designed with dedicated interfaces for the Controller Area Network (CAN-Bus) system. This integration ensures the system receives precise, error-free door status and speed signals directly from the vehicle’s Electronic Control Units (ECUs). The use of specialized CAN-Bus decoding modules eliminates potential signal latency, guaranteeing synchronization of step deployment and retraction with the opening and closing of doors.

The hardware is engineered to operate within the 12V DC systems common in European passenger vehicles, incorporating voltage stabilization circuits to mitigate transient spikes and dips, which are critical for the longevity of both the motor assembly and the onboard control unit. Specific attention is given to E-Mark certification requirements where applicable, ensuring compliance with European regulatory standards for automotive components.

Bridging Innovation with European Automotive Standards

The European automotive market demands precision, sophisticated electronics integration, and adherence to stringent safety norms. Our electric steps are developed to meet these high expectations, offering seamless mechanical and digital integration with popular European SUVs, including models from Mercedes-Benz, Alfa Romeo, and PSA Group vehicles.

Established in 2014 near the Yangtze River Golden Triangle, we are a technology-based manufacturer focused exclusively on medium and high-end SUV electric pedals. Our internal R&D capabilities, supported by over 40 technical managers, allow us to reverse-engineer and precisely map the chassis mounting points and electrical protocols of European models, ensuring every unit is factory-aligned for the EU and related export markets.

Targeted European Market Applications

OEM/Accessory Portfolios: Supplying European automotive parts distributors and franchised dealerships looking for high-quality, electronically compatible accessories that do not void manufacturer warranties.
Rental Fleets and Executive Transfers: Used in corporate fleets and luxury rental services in cities where client convenience and vehicle prestige are paramount.
Diverse Climatic Zones: Products are tested to perform reliably in Northern Europe’s freezing temperatures (requiring high-strength anti-corrosion coatings) and Southern Europe’s high heat and UV exposure.
Compliance-Sensitive Markets: Targeting markets that strictly enforce E-Mark, TUV, and other regional safety and electromagnetic compatibility (EMC) regulations.

Technical Parameters for EU Compatibility

Signal Interface	CAN-Bus / Digital Door Sensor Decoding
EMC Standard	Tested to ECE R10 (Electromagnetic Compatibility)
Corrosion Resistance	Salt Spray Tested 1000+ Hours (ISO 9227)
Deployment/Retraction Cycles	100,000+ Cycles (Full Load Simulation)
Maximum Static Load	300 kg / 660 lbs

FAQ: European Vehicle Step Solutions

Q: How do you ensure compatibility with different European model years?
A: We maintain a dedicated R&D database tracking the evolution of CAN-Bus protocols and physical chassis designs for our target European models. This ensures our decoding modules are updated to support new model variations.

Q: Are your products compatible with European vehicle start-stop systems?
A: Yes. Our control units are designed with low standby current draws (typically <5mA) and are electrically isolated from non-critical systems, ensuring they do not interfere with the vehicle's battery management or start-stop functionality.

Q: Can the steps be installed in service mode for vehicle diagnostics?
A: The control module features a service mode protocol that can be activated (often via an in-cabin switch or fuse pull) to permanently retract the steps, providing full undercarriage access for routine vehicle maintenance or workshop diagnostics.

Regulatory and Functional Advantages

E-Mark Readiness: Products are manufactured with traceability and documentation prepared to support E-Mark certification for easier importation and sale across the EU.
Aesthetic Symmetry: Design profiles are optimized to complement the sophisticated, often minimalist aesthetic of European SUV styling, integrating flush with the rocker panel when retracted.
High-Speed Communication: Direct CAN-Bus monitoring allows the steps to respond instantly to door unlatching, preventing unnecessary delay in access.
Non-Invasive Installation: European vehicle owners are sensitive to modifications; our kits use factory mounting points, requiring zero drilling into the chassis structure.

Production Protocols for International Consistency

Our centralized manufacturing facility utilizes ERP system control to guarantee quality and traceability across large-volume European orders.

Batch Testing: Every shipment bound for the European market undergoes a specific batch test (including salt spray and deployment cycle verification) and is accompanied by a Certificate of Conformity (COC).
Technical Support and Training: We provide technical training and standardized diagnostic tools to our European distribution partners, enabling efficient installation and fast, localized after-sales support.
Packaging Optimization: Export packaging is designed to minimize volume while maximizing protection against transit damage, specifically optimizing container loading efficiency for long-haul ocean freight to European ports.

Material Selection Focused on Longevity in European Climates

European road conditions, particularly the heavy use of de-icing salts, necessitate specialized materials.

Structural Aluminum: 6063-T5 or 6061-T6 Aluminum Alloy is extruded for the step platform, chosen for its excellent machinability and natural corrosion resistance, further enhanced by anodization.
Hardware and Fasteners: All non-aluminum fasteners (bolts, pivot pins) are specified as AISI 304 Stainless Steel or are finished with a robust, non-electrolytic coating (e.g., Dacromet or Geomet) to resist road salt corrosion better than standard zinc plating.
Motor Housing: Sealed, die-cast aluminum housing for the electric motor, protected by an EPDM gasket and IP67 certification to withstand high-pressure washing and heavy rain.

about Bohai

R&D and manufacturing of mid-to-high-end SUV electric pedals.

Bohai Automotive Technology (Zhejiang Huzhou) Co., Ltd. was established in 2014. It is a technology-based enterprise specializing in R&D China Steps for European Car Models Manufacturers and Wholesale Steps for European Car Models Suppliers The company is located on the southern bank of the beautiful Taihu Lake in the hinterland of the Yangtze River Golden Triangle-Changxing County, Huzhou City, Zhejiang Province. It is about 150 kilometers away from Shanghai, Hangzhou, Nanjing, Ningbo, Suzhou, Wuxi and other large and medium cities.

know more

Language

+86-400-6265788