Off-Road Vehicle Side Protection Steps

-- Steady & Reliable Manufacturer --

Technical Overview

Side protection steps for off-road vehicles (such as the Tank 300) are engineered with a dual mandate: enhanced accessibility and rocker panel protection. The structure utilizes Thick-Walled Q345 High-Tensile Steel tubing or box sections, designed to withstand lateral impacts from rocks, trails, or other obstacles without deforming the vehicle's body structure.

The deployment mechanism is Heavy-Duty and High-Torque, specified to reliably break through accumulations of mud, ice, and heavy debris. Mounting points are strategically reinforced to distribute impact loads across the vehicle frame, acting as a functional skid plate for the rocker area when retracted.

Introduction

Off-road vehicles require accessories built for unforgiving environments. These steps are a functional necessity, providing essential cabin access while serving as robust armor for the vehicle's vulnerable sills. The design prioritizes structural toughness and mechanical resilience over aesthetic minimalism.

Bohai Automotive Technology Co., Ltd. applies its knowledge of rugged engineering to this segment. Our products are tested to withstand the dynamic forces encountered during trail driving, water crossings, and rock crawling, ensuring reliable function when the vehicle is most dependent on its components.

Applications

Dedicated Off-Road SUVs: Essential upgrades for vehicles like the Tank 300, Great Wall Cannon, and modified versions of the Mercedes G63-AMG.
Utility and Exploration Fleets: Used by geological surveyors, mining operations, or remote service technicians where component failure is unacceptable.
Extreme Climate Regions: Designed for reliability in conditions with heavy mud, deep snow, or large temperature swings.
Suspension-Lifted Vehicles: Provides a necessary, durable access point after the vehicle's ride height has been significantly increased for off-road use.

Specification

Structural Material	Q345 High-Tensile Steel (Thick Gauge)
Impact Rating	Designed to Withstand Specified Side Impact Loads
Motor Torque	Enhanced Torque Output (Mud/Ice Breakaway)
Corrosion Protection	Zinc Primer + Heavy-Duty Textured Powder Coat
Mounting Method	Direct to Chassis Frame Rails (Multi-Point)
Step Surface	Integrated Aggressive Cleats / Anti-Slip Grid
Sealing Standard	IP68 (Complete Dust and Water Immersion)

Common Questions

Q: Can the steps handle being hit by a rock while driving on a trail?
A: Yes. The structural components are made from high-tensile steel designed for energy absorption and deflection. They are engineered to sustain significant impacts common in off-road environments.

Q: Does the electric mechanism require special cleaning after mudding?
A: Regular cleaning with a high-pressure hose is sufficient. The system is IP68 sealed and the motor enclosure is designed to shed contaminants. We recommend a check of the linkages after particularly heavy mud exposure.

Q: Can the steps be locked in the deployed position for use as rock sliders?
A: Some specialized off-road models offer a dedicated software mode or manual switch that locks the steps in the deployed position, allowing them to act as rock sliders for added protection.

Core Features

Rocker Panel Defense: Functions as a sacrificial barrier, protecting the vehicle's underbody and doors from impact damage during off-road travel.
Contaminant Resistance: High-torque motor and robust gearing maintain function even when exposed to heavy loads of mud, sand, and ice.
Reinforced Load Distribution: The heavy-duty brackets are engineered to transfer vertical and horizontal impact forces directly to the vehicle's frame.
Aggressive Traction: The step surface features deep ribbing or raised cleats, maximizing boot grip even when covered in wet or slick material.

Manufacturing & Customization

Production involves Heavy-Duty Press Brake Forming and Certified Weld Procedures for the structural steel components. All components undergo a simulated Vibration and Shock Test to ensure mechanical integrity is preserved under off-road conditions.

Customization Opportunities: Focused on resilience and function:

Winch Mounting Points: Designing brackets with integrated recovery points or anchor mounts for use with off-road recovery gear.
Skid Plate Integration: Adding a reinforced, removable aluminum skid plate section to the retracted step for enhanced undercarriage protection.
Custom Tread Cleat Design: Engineering unique, aggressive tread patterns to meet the specific traction requirements of different geographical terrains.

Material Selection

The structural steel is Q345 High-Tensile Steel, which has higher yield strength than standard Q235, providing superior resistance to bending and torsional forces from impacts.

The finish consists of a Zinc-Rich Epoxy Primer followed by a Thick, Textured Powder Coat (often a chip-resistant 'crinkle' finish) for maximum protection against abrasion and corrosion.

The motor unit and wiring are protected by Reinforced IP68-Rated Housings and Oil-Resistant Cable Jacketing to survive exposure to lubricants and solvents.

about Bohai

R&D and manufacturing of mid-to-high-end SUV electric pedals.

Bohai Automotive Technology (Zhejiang Huzhou) Co., Ltd. was established in 2014. It is a technology-based enterprise specializing in R&D China Off-Road Vehicle Side Protection Steps Manufacturers and Wholesale Off-Road Vehicle Side Protection Steps Suppliers The company is located on the southern bank of the beautiful Taihu Lake in the hinterland of the Yangtze River Golden Triangle-Changxing County, Huzhou City, Zhejiang Province. It is about 150 kilometers away from Shanghai, Hangzhou, Nanjing, Ningbo, Suzhou, Wuxi and other large and medium cities.

know more

Language

+86-400-6265788