Child Safety Entry Steps

-- Steady & Reliable Manufacturer --

Ergonomic Design for Reduced Step-Up Height

These steps are specifically engineered to provide a safe, intermediate stepping point for children and shorter passengers. The primary design focus is on achieving the lowest possible deployed position—often 4 to 6 inches lower than a static board—to significantly reduce the vertical lift required for small children.

The step tread utilizes an aggressive, multi-directional anti-slip pattern composed of soft-touch, high-grip rubber compound, designed to provide secure footing even when wet or muddy. The linkage geometry is optimized to deploy the step further away from the vehicle body, allowing for an easier, less constricted entry motion.

Prioritizing Safety and Independent Access for Children

For family-oriented SUVs, the ability for children to enter and exit the vehicle independently and safely is a critical convenience factor. Our child safety entry steps are designed to minimize the risk of falls and awkward maneuvers associated with high ground clearance vehicles.

As a specialized manufacturer, our mission is to apply our technical capabilities—including rigorous performance testing and precise CNC production—to deliver solutions that enhance vehicle utility and safety for all occupants. Our commitment to quality ensures these steps function reliably day after day, providing peace of mind for parents globally.

Key Application Areas

Family SUV Upgrades: Highly popular for mid-size and large family SUVs (e.g., Nissan X-Trail, Peugeot 5008) where the primary users include young children.
School Run Vehicles: Used in vehicles making multiple stops with frequent ingress/egress by small children.
Minivan/Van Conversions: Installed on higher-clearance passenger vans (e.g., Mercedes-Benz V260) where a lower, safe step is essential.
Safety-Conscious Markets: Targeting markets with high consumer demand for integrated child safety features in vehicle accessories.

Technical Parameters for Child Safety

Deployed Height Reduction	100-150 mm lower than standard running board
Anti-Slip Rating	Tested to 0.8+ Coefficient of Friction (COF) (Wet Condition)
Safety Shutoff Trigger Force	Low-Force Anti-Pinch (Set below 150 N)
Tread Material	High-Grip, Shock-Absorbing Rubber/Polymer
Cycle Tested Load	150 kg (Children + Parent Assist Load)

FAQ: Child Safety Entry Steps

Q: Why is a lower deployment height safer for children?
A: A lower step height reduces the risk of injury from missteps and allows children to climb in without relying on awkward handholds, promoting independence and reducing strain on joints.

Q: Is the rubber surface durable against wear and tear?
A: Yes, we use a specifically formulated, high-density EPDM/rubber composite that is highly resistant to abrasion, UV damage, and chemical cleaners, ensuring the high-grip texture remains effective for the product's lifespan.

Q: Can the steps still support an adult?
A: Absolutely. While optimized for child safety and access, the underlying structure is built from the same high-strength aluminum and steel components, retaining a certified static load capacity suitable for any adult passenger (typically 150-200 kg for dynamic load).

Safety-Focused Design and Features

Enhanced Anti-Pinch Sensor: The safety sensor is tuned to a lower force threshold than standard steps, ensuring instantaneous reversal even with minimal resistance from a child's shoe or hand.
Wider-Stance Deployment: The unique linkage extends the step slightly wider, moving the step platform beyond the edge of the door, minimizing the risk of a child scraping their shin on the vehicle sill.
Integrated Hazard Lighting: Some kits feature optional flashing perimeter lights on the step to maximize visibility to surrounding traffic and passersby during deployment and use.
TUV/SGS Compliance: The design and materials are selected to facilitate compliance with international children’s product safety testing standards where required by the import market.

Dedicated Quality Control for Child Safety Components

Child safety products receive enhanced scrutiny during the manufacturing and assembly stages.

Edge and Gap Analysis: Post-assembly QC includes verification of all internal gaps and external edges to ensure there are no pinch points or sharp corners accessible to a child’s fingers (in compliance with basic toy safety standards).
Low-Force Mechanism Testing: The safety cut-off feature is tested on a batch basis using calibrated weights (less than 150 N) to confirm immediate motor reversal before product shipment.
Custom Step Graphics: We offer customization options such as integrated playful tread patterns or specific color accents on the step plate to appeal to the family market segment.

Material Choices Focused on Grip and Low-Force Safety

Materials prioritize surface grip and component resilience to child-related impact/use.

Step Core: 5052 Marine-Grade Aluminum Alloy is used for its superior formability and corrosion resistance, suitable for continuous exposure to dirt and water splashes.
Tread Surface: Injected or bonded High-Durometer EPDM/TPR (Thermoplastic Rubber) providing a slip-resistant, non-abrasive interface for bare skin or light footwear.
Mounting Hardware: All visible screw heads and edges are recessed or smoothed via Tumbling/Finishing processes to eliminate sharp points and minimize snagging hazards.

about Bohai

R&D and manufacturing of mid-to-high-end SUV electric pedals.

Bohai Automotive Technology (Zhejiang Huzhou) Co., Ltd. was established in 2014. It is a technology-based enterprise specializing in R&D China Child Safety Entry Steps Manufacturers and Wholesale Child Safety Entry Steps Suppliers The company is located on the southern bank of the beautiful Taihu Lake in the hinterland of the Yangtze River Golden Triangle-Changxing County, Huzhou City, Zhejiang Province. It is about 150 kilometers away from Shanghai, Hangzhou, Nanjing, Ningbo, Suzhou, Wuxi and other large and medium cities.

know more

Language

+86-400-6265788